Vinyl tiles have been around for a long time, even before plastic laminate and sheet flooring started to make their presence felt. Vinyl was produced as an alternative to linoleum, but its amazing features and properties made it the top choice of people who wanted quality, convenience, and budget all rolled into one package.

Another key reason why homeowners prefer using vinyl flooring tiles Bahamas is that it is easy to install. The tiles are available in various colors, designs, and patterns. You can use them in any place to match the décor or as a contrasting element. Either way, vinyl tiles will add to the beauty and style of your home.

Vinyl tiles are available in two types. The glue-down tiles use mastic, while the self-adhesive tiles come in a peel-and-stick form.

Let’s take a look at the right way of installing vinyl flooring tiles.

Basic Tips

  • Try to create a layout that accommodates the maximum number of whole tiles and uniform cut tiles.
  • Always place odd-shaped cut tiles out of the main area and certainly away from the doorway.
  • The tiles take at least 24 hours to set and dry, and that’s why they must not be stepped on for one day after installation.

Refer to the guidelines provided by the manufacturer before you start the vinyl tile installation process. There could be some changes in the technical details based on the floor type.

The Different Types of Vinyl Installation

Vinyl tiles can be installed in three different types:

  • The locking system
  • Glue down or stick down
  • Looselay

How to Install Vinyl Flooring Tiles

Step 1 – Vinyl Tiles Preparation

It is a good move to acclimatize the vinyl tiles before they are installed. All you have to do is leave them open in the room where they are to be installed for at least a day at normal temperature.

The subfloor must be free of dust and dirt. Sweep and wash the floor and let it dry naturally. The floor must be flat to allow a seamless installation.

2. Take Necessary Precautions

This might sound like an obvious tip, but many installers do not follow it. Vinyl floor installation involves kneeling for long periods. Use good quality knee pads to make yourself comfortable during the installation process.

3. Tiles Positioning

You obviously aim to get a great-looking floor with a symmetrical look. Start the tiling work from the center of the room. Begin by placing a pair of tiles in two lines from the center of the floor at 90 degrees or at a right angle to each other and make an L-shape. Remember not to fix them down. This exercise is to make sure you get the laying right and there are no half tiles or edges popping up at visible places.

4. Fitting of Vinyl

When you get all the tiles in position and are satisfied with the results, the next step is to start fixing the tiles. This involves peeling off the backing or applying a fine layer of adhesive to the floor area where the tiles have to be fixed. The adhesive layer should be spread thin, so that excess quantity doesn’t ooze up and create inconvenience in the process.

Bond the tiles to the floor by applying pressure using a heavy object such as a roller. You may have to cut some excess tiles to fill the gaps near the walls. Do this with the help of a professional because it takes some expertise and practice. Use a sharp knife to cut vinyl tiles. Make sharp lines and bend the tile. It will snap easily.

If you want professional guidance and access to the best quality vinyl floor tiles in a wide range of styles and colors, visit Specialty Kitchen and Bath, Bahamas.

0